ETK-11.0 – ECU Interface

Technical Data

CPU interface
CPU interface Bus interface	2.5 V/ 3.3 V compatible bus interface for non-multiplexed bus
CPU interface	16 bit data bus
CPU interface Supported processors	Supports MPC5500 family of microcontrollers in packages with an external bus interface
CPU interface	For a complete list of supported microprocessors, please refer to the product's User's Guide.
CPU interface Configuration	Project-specific configuration for memory configurations stored in EEPROM
CPU interface Board
CPU interface Dimensions (HxWxD)	8.9 x 94 x 54 mm/ 0.4 x 3.7 x 2.1 in
CPU interface Power supply
CPU interface Input voltage	4.3 V to 18 V
CPU interface	Stand-by: min. 4.3 V
CPU interface Input current at 12 V	approx. 70 mA normal operation
CPU interface	approx. 12 mA stand-by
CPU interface Memory emulation
CPU interface Emulation memory	Two memory pages with 1 MB (1024 KB) data memory each, maximum access time 25 nsec
CPU interface Measured data memory	One memory page with 256 KB of memory, maximum access time 25 nsec
CPU interface Flash memory	1 MB (1024 KB) flash (data)
CPU interface Host interface
CPU interface Serial interface	100 Mbit/s
CPU interface	Double-shielded line
CPU interface	Electrically isolated
CPU interface Operation temperature
CPU interface Temperature range	-40 °C to +110 °C / -40 °F to +230 °F

This product has been developed and released for use in automotive applications. For usage in other domains please contact your ETAS representative.

Ordering Information

1 – Interface Connection
2 – ETK Connection (for all 100 Mbit ETKs)
3 – Power Supply Connection
4 – ECU Connection
5 – Ethernet PC Connection

Order Name	Short Name	Order Number
Order Name ETK-11.0	Short Name	Order Number
Order Name ETK11.0 Emulator Probe	Short Name ETK11.0	Order Number F‑00K‑102‑632
Order Name Optional Accessories for ETK-11.0	Short Name	Order Number

1 – Interface Connection (all 100 Mbit ETKs to ES59x, ES690, ES910)
1 – Interface Connection (all 100 Mbit ETKs to ES59x, ES690, ES910) ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 3 m	CBM150‑3	F‑00K‑102‑556
1 – Interface Connection (all 100 Mbit ETKs to ES59x, ES690, ES910) ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 5 m	CBM150‑5	F‑00K‑102‑557
1 – Interface Connection (all 100 Mbit ETKs to ES59x, ES690, ES910) ETK Interface Cable 100 Mbit/s, Lemo 1B FFG - Lemo 1B FFG (4mc-4mc), 10 m	CBM150‑10	F‑00K‑102‑553

2 – ETK Connection (for all 100 Mbit ETKs)
2 – ETK Connection (for all 100 Mbit ETKs) ETK ECU Adapter Cable, Shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc), 0m6	KA54	F‑00K‑001‑302
2 – ETK Connection (for all 100 Mbit ETKs) ETK ECU Adapter Cable, Lemo 1B PHG - JST PHR (4fc-5fc), 0m6	KA55	F‑00K‑001‑303
2 – ETK Connection (for all 100 Mbit ETKs) ETK ECU Adapter Cable, Shield on ECU-Housing, Lemo 1B HMG - JST PHG (4fc-5fc), 0m085	CBAM200.2‑0m085	F‑00K‑104‑312
2 – ETK Connection (for all 100 Mbit ETKs) ETK ECU Adapter Cable, Shield on ECU-housing, Lemo 1B HMG - JST PHG (4fc-5fc), 0m130	CBAM200‑0m130	F‑00K‑104‑852
2 – ETK Connection (for all 100 Mbit ETKs) ETK ECU Adapter Cable, pre-assembled into PG9 screwing, shield on ECU- Housing, Lemo 1B PHG - JST PHR (4fc-5fc), 0m50	CBAM261‑0m5	F‑00K‑107‑754

2&3 – Combined ETK ECU Adapter and Power Supply Cable (all 100 Mbit ETKs)
2&3 – Combined ETK ECU Adapter and Power Supply Cable (all 100 Mbit ETKs) ETK ECU Adapter and Power Supply Cable, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - open wires (2fc-2c), 0m6	CBAM210‑0m6	F‑00K‑104‑873
2&3 – Combined ETK ECU Adapter and Power Supply Cable (all 100 Mbit ETKs) ETK ECU Adapter and Power Supply Cable, Shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - open wires (2fc-2c), 0m60	CBAM220‑0m6	F‑00K‑105‑075
2&3 – Combined ETK ECU Adapter and Power Supply Cable (all 100 Mbit ETKs) ETK ECU Adapter and Power Supply Cable, pre-assembled into PG9 screwing, shield on ECU-Housing, Lemo 1B PHG - JST PHR (4fc-5fc) / Lemo 0B PHG - JST PAP (2fc-2fc), 0m50	CBAM260‑0m5	F‑00K‑107‑753

3 – Power Supply Connection
3 – Power Supply Connection ETK Power Supply Cable with Filter Coil, JST PHR - open wires (2fc-2c), 0m19	ETV2	F‑00K‑000‑593
3 – Power Supply Connection ETK Power Supply Cable for External Supply, with Filter Coil, Lemo 0B EGG - open wire (2fc-1c), 0m2	KA50	F‑00K‑000‑940
3 – Power Supply Connection External Power Supply Cable for ETKs, Lemo 0B - FGG open wires (2fc-1c), 2 m	K70.1	F‑00K‑109‑270
3 – Power Supply Connection ETK power supply for 6-36V DC input	ETP1	F‑00K‑000‑624
3 – Power Supply Connection ETK power supply for 4,3-36V DC input, with galvanic isolation	ETP2	F‑00K‑104‑010

4 – ECU Connection
4 – ECU Connection ETK 8.2 Adapter with Flex-Foil for Daimler Chrysler	US Part: ETAE10	F‑00K‑102‑816
4 – ECU Connection ECU Connection Protection Cap (for CBAM230, CBAM240)
4 – ECU Connection Cap to protect open Lemo 1B sockets against dirt, cost effective	CAP_LEMO_1B_LC	F‑00K‑105‑683

5 – Ethernet PC Connection
5 – Ethernet PC Connection Further information on the Ethernet PC Connection, can be found in the cable page Ethernet Connection.

Note: This list contains only a selection of available adapters. A comprehensive overview is available in the User Guide of each ETK.

Downloads

ETAS Download Center provides abundant information on ETAS Products and Solutions, in the form of flyers, brochures, technical articles, or manuals. You will also find hotfixes and software updates.

Download Center

Contact us

Do you have any questions? Feel free to send us a message. We will be more than happy to help.

Contact form

Support hotline